Formula map

Medication math and IV therapy: every formula, worked

Medication math is a short list of formulas applied with one method: convert everything to matching units, then multiply by conversion factors until only the answer unit remains. The core set is desired over have for doses, volume over time for pump rates (mL/hr), volume times drop factor over minutes for drops (gtt/min), and dose per kilogram times weight for weight-based orders.

For study and practice only; every real dose needs the order, a current drug reference and an independent double-check.

What are the core medication math formulas at a glance?

One row per calculation, with the worked answer from the example below and the free tool that does it step by step.

Medication math formulas, worked answers and calculators
CalculationFormulaWorked answerTool
Desired over haveAmount to give = (Desired ÷ Have) × Quantity1.5 mLOpen calculator
Reconstituted powder (volume to draw up)Volume (mL) = Ordered dose ÷ Label concentration after mixing (per mL)1.5 mLOpen calculator
Pump rate (mL/hr)mL/hr = Volume (mL) ÷ Time (hr)125 mL/hrOpen calculator
Drip rate (gtt/min)gtt/min = (Volume (mL) × Drop factor (gtt/mL)) ÷ Time (min)50 gtt/minOpen calculator
IV push rate (mL per 15 seconds)mL = dose ÷ concentration; mL/min = mL ÷ minutes; mL per 15 s = mL/min × (15 ÷ 60)0.25 mL every 15 seconds (2 mL over 2 minutes)Open calculator
Heparin infusion (units/kg/hr to mL/hr)Concentration (units/mL) = bag units ÷ bag mL; units/hr = units/kg/hr × kg; mL/hr = units/hr ÷ units/mL28.8 mL/hrOpen calculator
Weight-based drip in mcg/kg/min (for example vasoactive infusions)mL/hr = (mcg/kg/min × kg × 60) ÷ concentration (mcg/mL)15 mL/hrOpen calculator
Non-weight-based drip in mcg/min (or mg/hr)mL/hr = (mcg/min × 60) ÷ concentration (mcg/mL); for mg/hr orders, mL/hr = mg/hr ÷ mg/mL6 mL/hrOpen calculator
Units-per-hour infusion (for example insulin)mL/hr = units/hr ÷ concentration (units/mL)15 mL/hrOpen calculator
Pediatric safe dose rangeDaily min/max (mg) = mg/kg/day range × kg; per-dose range = daily range ÷ doses per day75 mg per dose is within the practice rangeOpen calculator
Pediatric maintenance fluids (4-2-1 rule)mL/hr = 4 × first 10 kg + 2 × next 10 kg + 1 × kg above 2065 mL/hrOpen calculator
Pediatric fluid bolus and dehydration deficitBolus (mL) = mL/kg × kg; pump mL/hr = mL ÷ minutes × 60; Deficit (mL) = kg × % dehydration × 10300 mL at 300 mL/hrOpen calculator
Body surface area (Mosteller)BSA (m²) = √((height cm × weight kg) ÷ 3,600)1.82 m²Open calculator
Ideal and adjusted body weight (Devine)Male IBW = 50 + 2.3 × (inches over 60); Female IBW = 45.5 + 2.3 × (inches over 60); Adjusted = IBW + 0.4 × (actual − IBW)IBW 73 kg; adjusted 83.8 kgOpen calculator
Creatinine clearance (Cockcroft-Gault)CrCl (mL/min) = [(140 − age) × kg × (0.85 if female)] ÷ (72 × serum creatinine mg/dL)about 66 mL/minOpen calculator
Tube feeding pump rate (mL/hr)Volume (mL/day) = kcal/day ÷ kcal/mL; mL/hr = Volume ÷ hours running100 mL/hrOpen calculator
Parkland formula24-hr volume (mL) = 4 × kg × %TBSA; half in the first 8 hr, half in the next 16 hr11,200 mL in 24 hr (700 mL/hr, then 350 mL/hr)Open calculator

What is the safest way to set up any dosage problem?

  1. Write the unit you need. mL/hr, gtt/min, mg, units/hr. The answer unit tells you which formula applies.
  2. Convert first. Pounds to kilograms (divide by 2.2), grams to milligrams (× 1,000), milligrams to micrograms (× 1,000), hours to minutes (× 60).
  3. Set up with units that cancel. Arrange each conversion factor so the unwanted unit cancels.
  4. Round once, at the end. Follow the stated rule and device limits: whole drops for gtt/min, the pump’s precision for mL/hr.
  5. Sense-check and double-check. Ask whether the answer is a plausible volume or rate, and have a second nurse verify any high-alert drip independently.

How do I calculate an oral or injectable dose?

Start here for tablets, liquids and injections. Put the ordered dose and the dose on hand in the same units first (1 g = 1,000 mg; 1 mg = 1,000 mcg), then divide.

Desired over have

The amount to give is the ordered dose divided by the dose on hand, times the quantity that holds the dose on hand.

Amount to give = (Desired ÷ Have) × Quantity

Worked example

  1. Ordered: 75 mg. Vial label: 50 mg per 1 mL.
  2. (75 ÷ 50) × 1 mL = 1.5 mL

Answer: 1.5 mL

Try it in the Dosage Calculator→

Reconstituted powder (volume to draw up)

After mixing a powdered vial, divide the ordered dose by the concentration the label gives after reconstitution, not by powder ÷ diluent.

Volume (mL) = Ordered dose ÷ Label concentration after mixing (per mL)

Worked example

  1. Practice order: 500 mg. 1 g vial; the label says the mixed solution is about 330 mg/mL.
  2. 500 ÷ 330 = 1.515 mL
  3. Round to the tenth (1 mL or more): 1.5 mL

Answer: 1.5 mL

Powder ÷ diluent alone ignores the volume the powder itself adds (displacement), so it overstates the concentration. Use the label or package insert figure.

Try it in the Reconstitution Calculator→

How do I calculate an IV rate in mL/hr and gtt/min?

Pumps are programmed in mL/hr; gravity tubing is counted in drops per minute using the drop factor printed on the tubing package (macrodrip 10, 15 or 20 gtt/mL; microdrip 60 gtt/mL). Drops are whole drops, so round gtt/min to a whole number.

Pump rate (mL/hr)

The pump rate is the total volume divided by the time in hours.

mL/hr = Volume (mL) ÷ Time (hr)

Worked example

  1. 1,000 mL over 8 hours.
  2. 1,000 ÷ 8 = 125

Answer: 125 mL/hr

Try it in the IV Drip Rate Calculator→

Drip rate (gtt/min)

Drops per minute is the volume times the drop factor, divided by the time in minutes.

gtt/min = (Volume (mL) × Drop factor (gtt/mL)) ÷ Time (min)

Worked example

  1. 150 mL over 45 minutes with 15 gtt/mL tubing.
  2. (150 × 15) ÷ 45 = 2,250 ÷ 45 = 50

Answer: 50 gtt/min

Going the other way, mL/hr = gtt/min × 60 ÷ drop factor: 50 × 60 ÷ 15 = 200 mL/hr, the same as 150 mL in 45 minutes.

Try it in the IV Drip Rate Calculator→

IV push rate (mL per 15 seconds)

Find the volume, divide by the push time for mL/min, then split each minute into 15-second increments.

mL = dose ÷ concentration; mL/min = mL ÷ minutes; mL per 15 s = mL/min × (15 ÷ 60)

Worked example

  1. Practice order: 4 mg IV push over 2 minutes. Vial: 2 mg/mL.
  2. Volume: 4 ÷ 2 = 2 mL
  3. Rate: 2 mL ÷ 2 min = 1 mL/min
  4. Per 15 s: 1 × (15 ÷ 60) = 0.25 mL, 8 increments in 120 s

Answer: 0.25 mL every 15 seconds (2 mL over 2 minutes)

The push time comes from the order or a current drug reference, never from habit.

Try it in the IV Push Rate Calculator→

How do I calculate a continuous infusion (heparin, mcg/kg/min, mcg/min, insulin)?

High-alert drips are ordered per kilogram or per time. Every number below is an arithmetic example, not a dose: the order, the bag concentration and your institution's protocol supply the real values, and an independent double-check is required.

Heparin infusion (units/kg/hr to mL/hr)

Multiply the ordered dose by the weight to get units per hour, then divide by the bag concentration to get the pump rate.

Concentration (units/mL) = bag units ÷ bag mL; units/hr = units/kg/hr × kg; mL/hr = units/hr ÷ units/mL

Worked example

  1. Order 18 units/kg/hr, patient 80 kg, bag 25,000 units in 500 mL.
  2. Concentration: 25,000 ÷ 500 = 50 units/mL
  3. Rate: 18 × 80 = 1,440 units/hr
  4. Pump: 1,440 ÷ 50 = 28.8 mL/hr

Answer: 28.8 mL/hr

A loading bolus, when ordered, is bolus units/kg × kg (80 units/kg × 80 kg = 6,400 units); how it is given (separate syringe or the pump's bolus feature) and any maximum bolus cap follow your protocol.

Try it in the Heparin Drip Rate Calculator→

Weight-based drip in mcg/kg/min (for example vasoactive infusions)

Convert the per-minute, per-kilogram order to mcg/hr, then divide by the concentration in mcg/mL.

mL/hr = (mcg/kg/min × kg × 60) ÷ concentration (mcg/mL)

Worked example

  1. Order 5 mcg/kg/min, patient 80 kg, bag 400 mg in 250 mL.
  2. Concentration: 400 mg = 400,000 mcg; 400,000 ÷ 250 = 1,600 mcg/mL
  3. Dose: 5 × 80 = 400 mcg/min; × 60 = 24,000 mcg/hr
  4. Pump: 24,000 ÷ 1,600 = 15 mL/hr

Answer: 15 mL/hr

Arithmetic illustration only. Units matter: mcg/kg/min and mcg/min are different orders.

Try it in the Weight-Based Drip Calculator (mcg/kg/min)→

Non-weight-based drip in mcg/min (or mg/hr)

Multiply a per-minute order by 60 for the hourly amount, then divide by the concentration in the same mass unit.

mL/hr = (mcg/min × 60) ÷ concentration (mcg/mL); for mg/hr orders, mL/hr = mg/hr ÷ mg/mL

Worked example

  1. Practice order: 20 mcg/min. Bag: 50 mg in 250 mL.
  2. Concentration: 50 mg = 50,000 mcg; 50,000 ÷ 250 = 200 mcg/mL
  3. Dose per hour: 20 × 60 = 1,200 mcg/hr
  4. Pump: 1,200 ÷ 200 = 6 mL/hr

Answer: 6 mL/hr

There is no weight in this setup. If the order contains /kg, use the weight-based formula above.

Try it in the mcg/min & mg/hr Drip Calculator→

Units-per-hour infusion (for example insulin)

When the order is already in units per hour, divide by the bag concentration in units per mL.

mL/hr = units/hr ÷ concentration (units/mL)

Worked example

  1. Order 6 units/hr, bag 100 units in 250 mL.
  2. Concentration: 100 ÷ 250 = 0.4 units/mL
  3. Pump: 6 ÷ 0.4 = 15 mL/hr

Answer: 15 mL/hr

Arithmetic illustration only; titration is protocol-driven. For a units/kg/hr order, multiply by the weight in kg first.

Try it in the Insulin Drip Calculator→

How do I check a pediatric dose, maintenance fluids and a fluid bolus?

Children are dosed by weight in kilograms. Convert pounds first (lb ÷ 2.2 = kg), then compare the order with the reference range from a current drug reference.

Pediatric safe dose range

Multiply the reference mg/kg/day range by the weight, divide by the number of doses, and compare the ordered dose.

Daily min/max (mg) = mg/kg/day range × kg; per-dose range = daily range ÷ doses per day

Worked example

  1. Child 22 lb. Practice range 20 to 40 mg/kg/day in 4 doses (made-up numbers, not a real drug reference). Ordered 75 mg per dose.
  2. Weight: 22 ÷ 2.2 = 10 kg
  3. Daily range: 20 × 10 = 200 mg to 40 × 10 = 400 mg
  4. Per-dose range: 200 ÷ 4 = 50 mg to 400 ÷ 4 = 100 mg
  5. Ordered daily: 75 × 4 = 300 mg, inside 200 to 400

Answer: 75 mg per dose is within the practice range

Try it in the Pediatric Safe Dose Calculator→

Pediatric maintenance fluids (4-2-1 rule)

Maintenance is 4 mL/hr per kg for the first 10 kg, 2 for the next 10 kg and 1 for each kg above 20.

mL/hr = 4 × first 10 kg + 2 × next 10 kg + 1 × kg above 20

Worked example

  1. Child 25 kg.
  2. 4 × 10 = 40; 2 × 10 = 20; 1 × 5 = 5
  3. 40 + 20 + 5 = 65

Answer: 65 mL/hr

The daily form (100-50-20) gives 1,000 + 500 + 100 = 1,600 mL/day, and 1,600 ÷ 24 is about 66.7 mL/hr, so the two rules agree closely. Maintenance covers a well child only; a dehydrated child needs more on top.

Try it in the Pediatric Maintenance Fluids Calculator→

Pediatric fluid bolus and dehydration deficit

A bolus is the ordered mL/kg times the weight; a deficit is the weight times the percent dehydration times 10.

Bolus (mL) = mL/kg × kg; pump mL/hr = mL ÷ minutes × 60; Deficit (mL) = kg × % dehydration × 10

Worked example

  1. Child 15 kg, practice order 20 mL/kg over 60 minutes.
  2. Bolus: 20 × 15 = 300 mL
  3. Pump: 300 ÷ 60 × 60 = 300 mL/hr

Answer: 300 mL at 300 mL/hr

Deficit example: a 22 kg child about 10% dehydrated has a deficit of 22 × 10 × 10 = 2,200 mL, replaced over the ordered schedule on top of maintenance.

Try it in the Pediatric Fluid Bolus & Deficit Calculator→

How do I calculate BSA, ideal body weight and creatinine clearance for dosing?

Some drugs are dosed by body size or adjusted for kidney function. These three estimates are inputs to the dose, never the dose itself.

Body surface area (Mosteller)

BSA is the square root of height in centimeters times weight in kilograms, divided by 3,600.

BSA (m²) = √((height cm × weight kg) ÷ 3,600)

Worked example

  1. Height 170 cm, weight 70 kg.
  2. 170 × 70 = 11,900; 11,900 ÷ 3,600 = 3.306
  3. √3.306 = 1.818

Answer: 1.82 m²

Try it in the Body Surface Area (BSA) Calculator→

Ideal and adjusted body weight (Devine)

Ideal body weight starts at 50 kg for men or 45.5 kg for women, plus 2.3 kg for each inch over 5 feet.

Male IBW = 50 + 2.3 × (inches over 60); Female IBW = 45.5 + 2.3 × (inches over 60); Adjusted = IBW + 0.4 × (actual − IBW)

Worked example

  1. Man, 70 inches, actual weight 100 kg.
  2. IBW: 50 + 2.3 × 10 = 73 kg
  3. Adjusted: 73 + 0.4 × (100 − 73) = 73 + 10.8 = 83.8 kg

Answer: IBW 73 kg; adjusted 83.8 kg

Try it in the Ideal Body Weight Calculator→

Creatinine clearance (Cockcroft-Gault)

Estimated clearance rises with age-adjusted weight and falls as serum creatinine rises; multiply by 0.85 for women.

CrCl (mL/min) = [(140 − age) × kg × (0.85 if female)] ÷ (72 × serum creatinine mg/dL)

Worked example

  1. Woman, 60 years, 70 kg, serum creatinine 1.0 mg/dL.
  2. (140 − 60) × 70 × 0.85 = 80 × 70 × 0.85 = 4,760
  3. 72 × 1.0 = 72; 4,760 ÷ 72 = 66.1

Answer: about 66 mL/min

It estimates clearance, not measured GFR, and is least reliable at weight extremes, in acute kidney injury and in the very elderly.

Try it in the Creatinine Clearance Calculator→

How do I calculate a tube feeding rate?

Enteral pumps also run in mL/hr. Orders come as a total volume or a calorie goal; the formula's kcal/mL is printed on its label.

Tube feeding pump rate (mL/hr)

Turn a calorie goal into a daily volume, then divide by the hours the feed runs.

Volume (mL/day) = kcal/day ÷ kcal/mL; mL/hr = Volume ÷ hours running

Worked example

  1. Goal 1,800 kcal/day, practice formula 1.5 kcal/mL, cyclic feed over 12 hours.
  2. Volume: 1,800 ÷ 1.5 = 1,200 mL
  3. Pump: 1,200 ÷ 12 = 100 mL/hr

Answer: 100 mL/hr

The same 1,200 mL run continuously over 24 hours is 50 mL/hr. Free-water flushes are added separately, as ordered.

Try it in the Tube Feeding Rate Calculator→

How do I calculate burn resuscitation fluids?

The Parkland formula gives a starting estimate for the first 24 hours; the rate is then titrated to urine output.

Parkland formula

Give 4 mL per kg per percent of body surface burned over 24 hours, half in the first 8 hours from the time of injury.

24-hr volume (mL) = 4 × kg × %TBSA; half in the first 8 hr, half in the next 16 hr

Worked example

  1. 70 kg, 40% TBSA (second- and third-degree burns only).
  2. 4 × 70 × 40 = 11,200 mL
  3. First 8 hr: 5,600 ÷ 8 = 700 mL/hr; next 16 hr: 5,600 ÷ 16 = 350 mL/hr

Answer: 11,200 mL in 24 hr (700 mL/hr, then 350 mL/hr)

Many current burn protocols start at 2 mL/kg/%TBSA; follow the ordered formula.

Try it in the Parkland Formula Calculator→

What other nursing calculators sit alongside medication math?

Browse every calculator in the free nursing tools hub.

Which medication math mistakes cause the most harm?

  • Skipping the unit conversion. Pounds used as kilograms, or mg used as mcg, scales the answer by a factor of 2.2 or 1,000.
  • Misreading the per-minute or per-kilogram part. mcg/kg/min, mcg/min and units/kg/hr are different orders.
  • Decimal errors. Write 0.5 mg, not .5 mg, and 5 mg, not 5.0 mg (ISMP convention).
  • Rounding too early. Round at the last step, not in the middle.
  • Skipping the independent double-check on high-alert drips such as heparin and insulin (see the ISMP high-alert medications list (2024)).

Where can I practice medication math problems?

Reading a formula is not the same as solving it under time pressure. Work the method on original practice questions, each with a written rationale, then review the step-by-step guides.

Frequently asked questions about medication math

gtt/min = (volume in mL × drop factor in gtt/mL) ÷ time in minutes, rounded to a whole drop. For 150 mL over 45 minutes with 15 gtt/mL tubing, (150 × 15) ÷ 45 = 50 gtt/min. The drop factor is printed on the tubing package.

mL/hr = gtt/min × 60 ÷ drop factor. At 50 gtt/min with 15 gtt/mL tubing, 50 × 60 ÷ 15 = 200 mL/hr. Going the other way, gtt/min = mL/hr × drop factor ÷ 60.

Divide pounds by 2.2 to get kilograms (22 lb ÷ 2.2 = 10 kg), then multiply by the ordered dose per kilogram. Do the conversion first and round only at the end; a pounds-to-kilograms slip is one of the most common medication math errors.

Multiply the ordered units/kg/hr by the weight in kg to get units/hr, then divide by the bag concentration in units/mL. For 18 units/kg/hr, 80 kg and a 50 units/mL bag, 1,440 units/hr ÷ 50 = 28.8 mL/hr. Heparin is a high-alert medication, so the order, protocol and an independent double-check decide the real rate.

mcg/kg/min scales the dose to the patient's weight, so the hourly amount is mcg/kg/min × kg × 60. mcg/min is a fixed amount per minute regardless of weight. Reading the unit wrong changes the rate by the patient's whole body weight, which is why the unit is the first thing to check.

Write 0.5 mg with a leading zero and never 5.0 mg with a trailing zero. A missed decimal point can turn .5 into 5, a tenfold error, and 5.0 can be misread as 50. This is a standard error-prevention convention from the Institute for Safe Medication Practices.

Find the volume first (ordered dose ÷ concentration per mL), divide it by the push time in minutes for mL/min, then multiply by 15 ÷ 60 for the mL to push every 15 seconds. For a 4 mg practice order over 2 minutes from a 2 mg/mL vial: 4 ÷ 2 = 2 mL, 2 ÷ 2 = 1 mL/min, and 1 × 0.25 = 0.25 mL every 15 seconds. The push time comes from the order or a current drug reference.

Divide the bag's units by its mL for the concentration, then divide the ordered units/hr by that concentration. With 100 units in 250 mL the bag is 0.4 units/mL, so 6 units/hr runs at 6 ÷ 0.4 = 15 mL/hr. For a units/kg/hr order, multiply by the weight in kg first. Insulin is a high-alert medication: the protocol sets the dose and a second nurse checks the setup.

Multiply the ordered mL/kg by the child's weight in kilograms: 20 mL/kg for a 15 kg child is 300 mL. To run it on a pump, divide the volume by the ordered minutes and multiply by 60, so 300 mL over 60 minutes is 300 mL/hr. A dehydration deficit is a separate calculation: kg × percent dehydration × 10 mL.

Convert a calorie goal to volume first (kcal/day ÷ the formula's kcal/mL), then divide the volume by the hours the feed runs. A 1,800 kcal goal with a 1.5 kcal/mL practice formula is 1,200 mL, and over a 12-hour cyclic feed that is 100 mL/hr. A continuous feed over 24 hours would be 50 mL/hr.

Learn the one setup (dimensional analysis), then drill problems until it is automatic. This site has worked practice problems in the dosage calculations study guide and a free dosage calculations question set with a written rationale on every answer.

Sources

  • Mosteller RF. Simplified calculation of body-surface area. N Engl J Med. 1987;317(17):1098.
  • Cockcroft DW, Gault MH. Prediction of creatinine clearance from serum creatinine. Nephron. 1976;16(1):31-41.
  • Devine BJ. Gentamicin therapy. Drug Intell Clin Pharm. 1974;8:650-655 (source of the ideal body weight formula).
  • Holliday MA, Segar WE. The maintenance need for water in parenteral fluid therapy. Pediatrics. 1957;19(5):823-832.
  • Baxter CR, Shires T. Physiological response to crystalloid resuscitation of severe burns. Ann N Y Acad Sci. 1968;150(3):874-894.
  • Institute for Safe Medication Practices (ISMP). List of High-Alert Medications in Acute Care Settings (2024), and List of Error-Prone Abbreviations, Symbols, and Dose Designations (includes the leading and trailing zero rule).

Educational use only; verify against your institution’s policy and a current drug reference before any real dose.

Free · no spam

Get a free high-yield NCLEX question every week

One carefully written practice question plus a short study tip, emailed weekly. Unsubscribe anytime — we never share your address.