Part of: Medication Math and IV Therapy (every formula, worked)

IV THERAPY

Insulin drip calculator

To calculate an insulin drip rate, find the bag concentration first (units in the bag ÷ mL in the bag), then divide the ordered units/hr by it: mL/hr = units/hr ÷ units/mL. For a weight-based order, multiply units/kg/hr by the weight in kg first. At 100 units in 100 mL (1 unit/mL), 7 units/hr runs at 7 mL/hr. The calculator also works backward from the pump rate.

Free, no signup, runs in your browser. No protocol or glucose scale is built in; every number comes from your order.

Interactive calculator

Insulin drip calculator

Pick a direction, then enter the bag label and the numbers from the order or the pump. Everything comes from your order. There is no protocol, no glucose scale and no default dose built in. Results update as you type.

Result

Enter the bag units and volume and the ordered dose (plus weight for a units/kg/hr order) to see the pump rate and the worked setup.

For education and practice only. IV insulin is a high-alert medication; your institution’s protocol and the pump’s drug library govern real care, and this tool contains neither. Verify every value and perform an independent double-check before administering.

How it works

How do you calculate an insulin drip in mL/hr?

Insulin drip math is the same dimensional analysis as a heparin drip: units, mL and hours. Every step cancels a unit, so if the units on your answer are not the ones you wanted, the setup is upside down.

1. Bag concentration (units/mL)

units/mL = units in bag ÷ mL in bag

Read both numbers off the bag label. 100 units in 100 mL is 1 unit/mL; 100 units in 250 mL is 0.4 units/mL. Never assume a standard mix.

2. Weight-based orders only (units/hr)

units/hr = units/kg/hr × weight (kg)

If the order is in units/kg/hr, scale it to the patient first. Weight in pounds converts with lb ÷ 2.2 = kg; the calculator shows that step.

3. Pump rate (mL/hr)

mL/hr = units/hr ÷ units/mL

Divide the dose you need by what each mL holds. Round once, at the end, to the precision your pump and protocol allow.

Backward: rate to dose

units/hr = mL/hr × units/mL

To check a running drip, multiply the pump rate by the concentration. Divide by kg for units/kg/hr. Useful at handoff and on exam items that give you the rate.

Worked examples

What does an insulin drip calculation look like, step by step?

Three practice problems in the style of a dosage-calculation exam. The doses are illustrative numbers for the math, not dosing recommendations. Enter any of them in the calculator above to check the answer and see the worked setup.

Example 1: weight-based order, 1 unit/mL bag

Regular insulin infusion ordered at 0.1 units/kg/hr. The bag is 100 units in 100 mL. The patient weighs 70 kg. What pump rate do you set?

  1. 1. Concentration: 100 units ÷ 100 mL = 1 unit/mL.
  2. 2. Dose per hour: 0.1 units/kg/hr × 70 kg = 7 units/hr.
  3. 3. Pump rate: 7 units/hr ÷ 1 unit/mL = 7 mL/hr.

Answer: 7 mL/hr.

At 1 unit/mL the units/hr and the mL/hr are the same number. That is the only bag where the shortcut works.

Example 2: fixed-rate order, bag that is not 1 unit/mL

Insulin infusion ordered at 6 units/hr. The bag is 100 units in 250 mL. What pump rate do you set?

  1. 1. Concentration: 100 units ÷ 250 mL = 0.4 units/mL.
  2. 2. Pump rate: 6 units/hr ÷ 0.4 units/mL = 15 mL/hr.

Answer: 15 mL/hr.

Assuming 1:1 here would program 6 mL/hr and deliver only 2.4 units/hr (6 × 0.4), less than half the order.

Example 3: working backward from the pump

You take over a drip running at 12 mL/hr. The bag is 50 units in 100 mL. The patient weighs 132 lb. What dose is being delivered?

  1. 1. Concentration: 50 units ÷ 100 mL = 0.5 units/mL.
  2. 2. Dose per hour: 12 mL/hr × 0.5 units/mL = 6 units/hr.
  3. 3. Weight: 132 lb ÷ 2.2 = 60 kg.
  4. 4. Weight-based dose: 6 units/hr ÷ 60 kg = 0.1 units/kg/hr.

Answer: 6 units/hr, which is 0.1 units/kg/hr.

Compare the result with the active order. If they do not match, stop and clarify before you change anything.

What this tool will not do

Why does this calculator have no insulin titration scale?

Searches for an “insulin drip protocol” or a glucose-based rate chart are common, and the honest answer is that there is no single one to give you. Each institution writes its own: the glucose target, how often glucose is checked, when the rate changes and by how much, and when dextrose or potassium are added. The pump’s drug library is then built to match that local protocol.

A generic scale on a study site could be wrong for your unit and your patient, so this page covers only the arithmetic that is the same everywhere: dose, concentration and rate.

  • High-alert. ISMP lists insulin, subcutaneous and IV, as a high-alert medication class: errors are more likely to cause significant harm.
  • Monitoring is part of the label. The U-100 regular human insulin labels describe IV use under medical supervision with close monitoring of glucose and potassium.
  • Not every insulin goes IV. Concentrated U-500 regular insulin is labeled not to be given intravenously. The order and pharmacy set the product.
  • Check the concentration flag. If a bag works out above 1 unit/mL or below 0.05 unit/mL, outside the labeled IV ranges, the calculator asks you to re-check the entries for a typo.

Common questions

Insulin drip calculations: frequently asked questions

Find the bag concentration, then divide. Concentration (units/mL) = units in the bag ÷ mL in the bag. Pump rate (mL/hr) = ordered dose (units/hr) ÷ concentration (units/mL). With 100 units in 250 mL the bag is 0.4 units/mL, so an order for 6 units/hr runs at 6 ÷ 0.4 = 15 mL/hr. Keep the exact numbers through the work and round once at the end, to the precision your pump and protocol allow.

No. A bag of 100 units in 100 mL is 1 unit/mL, and at that strength units/hr and mL/hr are the same number, which is why the 1:1 shortcut is so widely taught. But other concentrations are used, and the shortcut gives a wrong rate for any bag that is not 1 unit/mL. The IV-administration sections of the U-100 regular human insulin labels give diluted ranges of 0.1 to 1 unit/mL (Humulin R U-100) and 0.05 to 1 unit/mL (Novolin R). Always calculate from the label on the bag in front of you.

Add one step at the start. Dose per hour (units/hr) = ordered dose (units/kg/hr) × weight (kg). Then mL/hr = units/hr ÷ units/mL. If the weight is in pounds, convert first: lb ÷ 2.2 = kg. For example, 0.05 units/kg/hr for a 176 lb patient is 176 ÷ 2.2 = 80 kg, 0.05 × 80 = 4 units/hr, and with a 1 unit/mL bag that is 4 mL/hr.

Work the formula backward. Dose (units/hr) = pump rate (mL/hr) × concentration (units/mL). A pump at 12 mL/hr on a bag of 50 units in 100 mL (0.5 units/mL) is delivering 12 × 0.5 = 6 units/hr. Divide by weight in kg to get units/kg/hr: for a 60 kg patient, 6 ÷ 60 = 0.1 units/kg/hr. This is the check you do at handoff or when you pick up a drip that someone else started.

Because IV insulin protocols are written by each institution. The glucose targets, how often glucose is checked, when the rate goes up or down, and by how much all differ between facilities and patient populations, and the pump's drug library is built to match the local protocol. A generic scale on a study site could be wrong for your unit, so this tool does only the arithmetic between dose, concentration and rate. Rate changes come from your protocol and the ordering provider.

That is decided by the order and the pharmacy, not the nurse at the pump. The FDA labels for U-100 regular human insulin products describe intravenous use under medical supervision with close monitoring of blood glucose and potassium, diluted in a compatible IV fluid. Concentrated U-500 regular insulin is labeled not to be given intravenously. Whatever product is used, the math on this page is the same: units, mL and hours.

It is free, needs no account and runs in your browser, so it works on a phone. But IV insulin is on the ISMP list of high-alert medications, and a math check does not replace the required safety steps. Verify every value against the order and the bag label, use the pump's drug library, and complete the independent double-check your policy requires before administering. This is a study and practice aid, not medical advice.

Keep practicing the med-math

More infusion and dosage practice

Insulin and heparin are the two units-based drips every nursing student is tested on. Work the heparin version with its loading bolus, practice gravity drip rates in gtt/min, or review the full dosage study guide.

This calculator and all study material on this site are for practice and study only. Institutional protocol and the pump drug library govern IV insulin in real care.

Practice these: free questions

Apply it on NCLEX-style questions

A calculator hands you the number; the exam makes you reach it under pressure and defend it. Drill Dosage Calculations questions that put this calculation inside a clinical scenario, each with a written rationale, so you learn why the answer is right and not just what it is.

Free · no spam

Get a free high-yield NCLEX question every week

One carefully written practice question plus a short study tip, emailed weekly. Unsubscribe anytime — we never share your address.