Part of: Medication Math and IV Therapy (every formula, worked)
IV THERAPY
Weight-based drip calculator (mcg/kg/min to mL/hr)
To convert mcg/kg/min to mL/hr, multiply the dose by the patient’s weight in kg and by 60 minutes, then divide by the bag concentration in mcg/mL (mg × 1,000 ÷ mL). Example: 5 mcg/kg/min × 80 kg × 60 ÷ 1,600 mcg/mL = 15 mL/hr. Reverse the chain to find the dose a running pump delivers.
For norepinephrine, dopamine, dobutamine and other drips ordered per minute. No doses built in.
Interactive calculator
Weight-based drip calculator
Pick a direction, then enter the order and the bag exactly as labeled. Every number comes from your order; no drug doses are built in. Results and the worked setup update as you type.
Result
Enter the weight, the bag, and the ordered dose to see the answer and the worked setup.
For education and practice only. This tool contains no drug doses, dose ranges or titration limits. Institutional protocol, the order and the pump’s drug library govern real care; verify every value and perform an independent double-check before administering.
How it works
How do you convert mcg/kg/min to mL/hr?
Four conversions, always in the same order. Each one changes a single unit, which is why dimensional analysis catches mistakes: if a unit does not cancel, the setup is wrong.
1. Bag concentration (mcg/mL)
mcg/mL = (drug mg × 1,000) ÷ bag mL
Bags are labeled in mg; doses are in mcg. Convert first. If the label already states mcg/mL, use it directly.
2. Dose per minute (mcg/min)
mcg/min = dose (mcg/kg/min) × weight (kg)
Weight in pounds? Divide by 2.2 first. If the order is already in mcg/min, skip this step: weight is not used.
3. Dose per hour (mcg/hr)
mcg/hr = mcg/min × 60
The order is per minute, the pump is per hour. This is the step students most often skip.
4. Pump rate (mL/hr)
mL/hr = mcg/hr ÷ mcg/mL
Combined: mL/hr = (dose × kg × 60) ÷ mcg/mL. The calculator shows the answer to the tenth, or to two significant figures when it is under 0.1 mL/hr.
Worked examples
How do you solve a weight-based drip problem step by step?
Three practice problems, one for each kind of question you will meet. The doses are practice numbers, not dosing guidance. Enter any of them in the calculator above to see the same setup returned.
Example 1: dose to pump rate
Dopamine is ordered at 5 mcg/kg/min for a patient who weighs 80 kg. The bag is dopamine 400 mg in 250 mL. What pump rate do you set?
- 1. Concentration: 400 mg × 1,000 mcg/mg = 400,000 mcg; 400,000 mcg ÷ 250 mL = 1,600 mcg/mL.
- 2. Dose per minute: 5 mcg/kg/min × 80 kg = 400 mcg/min.
- 3. Dose per hour: 400 mcg/min × 60 min/hr = 24,000 mcg/hr.
- 4. Pump rate: 24,000 mcg/hr ÷ 1,600 mcg/mL = 15 mL/hr.
Answer: 15 mL/hr
For this patient and bag, each 1 mcg/kg/min is 3 mL/hr (80 × 60 ÷ 1,600), so a 1 mcg/kg/min titration step moves the pump by 3 mL/hr.
Example 2: weight in pounds
Dobutamine is ordered at 2.5 mcg/kg/min for a patient who weighs 154 lb. The bag is dobutamine 250 mg in 250 mL. What pump rate do you set?
- 1. Weight: 154 lb ÷ 2.2 lb/kg = 70 kg.
- 2. Concentration: 250 mg × 1,000 mcg/mg = 250,000 mcg; 250,000 mcg ÷ 250 mL = 1,000 mcg/mL.
- 3. Dose per minute: 2.5 mcg/kg/min × 70 kg = 175 mcg/min.
- 4. Dose per hour: 175 mcg/min × 60 min/hr = 10,500 mcg/hr.
- 5. Pump rate: 10,500 mcg/hr ÷ 1,000 mcg/mL = 10.5 mL/hr.
Answer: 10.5 mL/hr
Plugging in 154 as if it were kilograms gives 23.1 mL/hr, 2.2 times too fast. Convert pounds before anything else.
Example 3: pump rate back to dose
Norepinephrine 4 mg in 1,000 mL is running at 60 mL/hr in a patient who weighs 100 kg. What dose in mcg/kg/min is the patient receiving?
- 1. Concentration: 4 mg × 1,000 mcg/mg = 4,000 mcg; 4,000 mcg ÷ 1,000 mL = 4 mcg/mL.
- 2. Drug per hour: 60 mL/hr × 4 mcg/mL = 240 mcg/hr.
- 3. Drug per minute: 240 mcg/hr ÷ 60 min/hr = 4 mcg/min.
- 4. Dose per kg: 4 mcg/min ÷ 100 kg = 0.04 mcg/kg/min.
Answer: 0.04 mcg/kg/min (which is also 4 mcg/min)
4 mg in 1,000 mL is the dilution described in the norepinephrine prescribing information. Step 3 already gives the answer in mcg/min, the unit that labeling uses.
Where answers go wrong
What are the most common drip calculation mistakes?
Each error below is a factor, not a rounding slip, so the wrong answer is far from the right one. Using Example 1 (correct answer 15 mL/hr):
| Mistake | Wrong answer | How far off |
|---|---|---|
| Skipping the ×60 (min to hr) | 0.25 mL/hr | 60 times too slow |
| Leaving the bag in mg (no ×1,000) | 15,000 mL/hr | 1,000 times too fast |
| Using pounds as kg (Example 2) | 23.1 mL/hr instead of 10.5 | 2.2 times too fast |
| Multiplying a mcg/min order by weight | weight × the correct rate | e.g. 80 times too fast for an 80 kg patient |
| Writing .04 instead of 0.04 | read as 4 | 100 times; ISMP lists the naked decimal as error-prone |
A quick sense check: for a mcg/kg/min order, the drug per hour in mcg is dose × kg × 60, and the pump rate is that number divided by the mcg/mL. If your answer is a fraction of a mL/hr, or in the thousands, recheck the ×60 and the ×1,000.
Reading the bag
What concentrations do vasoactive drips come in?
These are concentrations stated in the prescribing information. Facilities also mix and stock other strengths, so a bag of the same drug can differ from unit to unit. Always calculate from the label on the bag in your hand.
| Drug | As supplied or diluted | Concentration |
|---|---|---|
| Norepinephrine | 4 mg/4 mL vial, diluted per label in 1,000 mL of 5% dextrose | 4 mcg/mL [source] |
| Dopamine (premixed in 5% dextrose) | 400 mg in 250 mL, or 800 mg in 500 mL | 1,600 mcg/mL [source] |
| Dopamine (premixed in 5% dextrose) | 800 mg in 250 mL | 3,200 mcg/mL [source] |
| Dobutamine (premixed in 5% dextrose) | 250 mg, 500 mg or 1,000 mg in 250 mL | 1,000, 2,000 or 4,000 mcg/mL [source] |
Norepinephrine and other IV adrenergic agonists, along with IV inotropes, are on ISMP’s list of high-alert medications in acute care, which is why these drips call for smart-pump drug libraries and independent double-checks.
Common questions
Weight-based drip FAQ
Multiply the ordered dose (mcg/kg/min) by the patient's weight in kilograms to get mcg/min, multiply by 60 to get mcg/hr, then divide by the bag concentration in mcg/mL. In one line: mL/hr = (dose × kg × 60) ÷ mcg/mL. For 5 mcg/kg/min, 80 kg and a 1,600 mcg/mL bag: (5 × 80 × 60) ÷ 1,600 = 15 mL/hr.
Run the same chain backwards. Multiply the pump rate (mL/hr) by the concentration (mcg/mL) to get mcg/hr, divide by 60 to get mcg/min, then divide by the weight in kg. For 60 mL/hr of a 4 mcg/mL bag in a 100 kg patient: 60 × 4 = 240 mcg/hr, ÷ 60 = 4 mcg/min, ÷ 100 = 0.04 mcg/kg/min. This is how you confirm the dose a drip is actually delivering at handoff.
Vasoactive doses are ordered per minute, but infusion pumps run in mL per hour. There are 60 minutes in an hour, so the per-minute dose has to be multiplied by 60 before you divide by the concentration. Skipping it gives an answer 60 times too small, which is the most common error in these problems.
Multiply the milligrams by 1,000 to get micrograms, then divide by the bag volume in mL. A bag of 400 mg in 250 mL is 400 × 1,000 = 400,000 mcg ÷ 250 mL = 1,600 mcg/mL. If you leave the bag in mg while the dose is in mcg, the rate comes out 1,000 times wrong.
Both appear. The FDA prescribing information for norepinephrine expresses dosing in mcg per minute, while many critical-care orders and protocols are written in mcg/kg/min. Read which unit the order uses before you calculate: an order in mcg/min does not use the patient's weight at all. The calculator has a mcg/min setting for exactly this reason.
The calculator carries full precision through every step and rounds only what it displays: mL/hr to the tenth, and doses to two or three decimal places. A positive result never displays as 0: rates under 0.1 mL/hr and doses under 0.001 show two significant figures, and a rate under 0.1 or over 999 mL/hr triggers a unit-slip warning. Your pump, your course or your facility may round differently, so follow that rule. Always write a leading zero (0.04, never .04); ISMP lists the naked decimal point as an error-prone dose designation.
No. It has no starting doses, maximum doses or titration ranges, because those are set by the order, the drug's labeling and your institution's protocol. It only does the arithmetic for the numbers you enter. It is free, needs no account and runs in your browser, but it is a study and practice aid: verify every value against the order and bag label, use the pump's drug library, and perform an independent double-check per policy.
Sources
Where these facts come from
- Institute for Safe Medication Practices (ISMP). List of High-Alert Medications in Acute Care Settings (2024) (IV adrenergic agonists, including norepinephrine; IV inotropic medications).
- ISMP. List of Error-Prone Abbreviations, Symbols, and Dose Designations (naked decimal points, trailing zeros).
- Norepinephrine bitartrate injection, prescribing information, Dosage and Administration (dilution to 4 mcg/mL; dosing expressed in mcg per minute). DailyMed, U.S. National Library of Medicine.
- Dopamine hydrochloride in 5% dextrose injection, USP, prescribing information, Dosage Forms and Strengths (1,600 and 3,200 mcg/mL).
- Dobutamine in 5% dextrose injection, prescribing information (1,000, 2,000 and 4,000 mcg/mL in 250 mL).
- Pickar GD, Pickar Abernethy A. Dosage Calculations. 9th ed. Delmar Cengage Learning; 2013 (dimensional analysis for IV infusions).
Keep practicing the med-math
More infusion and dosage practice
Heparin drips use the same weight-based logic in units/kg/hr. Gravity drip rates add the drop factor. Practice both, then read the dosage study guide and the dosage calculation tips.
More free tools
Related calculators
The calculations that most often come up alongside this one, on the unit and in practice questions.
mcg/min & mg/hr Drip Calculator
Non-weight-based drips: mcg/min, mg/min or mg/hr to mL/hr, and a running rate back to the dose.
Heparin Drip Rate Calculator
Weight-based heparin infusion rates and bolus volumes from the bag concentration.
Insulin Drip Calculator
IV insulin units/hr or units/kg/hr to pump mL/hr from the bag concentration, and back.
IV Drip Rate Calculator
Convert an ordered volume and time into gtt/min or mL/hr for any drop factor.
Dosage Calculator
Solve desired-over-have medication math, unit conversions, and tablet/volume doses.
Practice these — free questions
Apply it on NCLEX-style questions
A calculator hands you the number; the exam makes you reach it under pressure. Drill Dosage Calculations questions that put drip math inside a clinical scenario, each with a written rationale so you learn why the answer is right.
Study and practice math only; the order, institutional protocol and pump drug libraries govern real care.
Free · no spam
Get a free high-yield NCLEX question every week
One carefully written practice question plus a short study tip, emailed weekly. Unsubscribe anytime — we never share your address.